***SOLD*** USED KALAMAZOO KS-450 DUAL MITER (2016) - 240V | Detroit Band Saw


KMT KS 450

Double mitering 60 degrees left and 60 degrees right.

Canted saw frame canted 6 degrees

Semi-automatic horizontal bandsaws allow quick and easy setup and operation.  Major components are massive for solid, vibration-free production cutting.  Machine operation is full cycle, semi-automatic. Material size is automatically sensed by the saw frame. With the push of a single button, the vise clamps, saw frame makes the cut at preset rate, automatically returns to clear work piece, vise opens, ready for the next cut. Production sawing can be very fast! Fully hydraulic, with free-standing operators console that may be conveniently placed in the most advantageous operator location.

Mitering is effortless with perfectly counterbalanced frame on bearings.

Material sensor, saw will rapid down until it touches material then go into controlled rate.  After cut is complete the saw head will lift to just above the  material ready for the next cut.

Carbide guides w/ rollers

What makes a used Detroit Band Saw piece of equipment different?

We go to market in a much different manner than most used equipment dealers: We do not “flip” used band saws; we make them 100% mechanically sound before they leave our building.

You can feel confident that the minute our saw hits your floor, it is ready for production. We go through every component and function with our unique process to make sure that all items on the saw are inspected, fixed, repaired, replaced, adjusted, and cleaned.

It may cost us more money on our bottom line, but we feel very strongly that this attention to being production-ready separates us from our competition, and gives our buyers an added level of value and comfort.


SKU: 70-1-2-1-1-2 Category:


Model KS450
Blade Drive Motor 3 HP
Blade Speeds 60-360 meet per minute
Blade Size 1 ¼” wide x 13’ 11” Long
@90° round 14″ square 13″ rectangular 12 1/2 x 17 1/2”
@ 45° (R) round 13″ square 12 1/2″ rectangular 11 3/4″ x 12 1/2″
@ 60° (R) round 8 1/4″ square 7 3/4″ rectangular 7″ x 10″
@ 45° (L) round 13″ square 12 1/2″ rectangular 11 3/4″ x 12 1/2″
@ 60°(L) round 6 1/4″ square 6″ rectangular 6″ x 10 1/2″
Work Height 37″
Power Requirements 208-220-230 volts – 20 amps
3 phase 60 cycles
Coolant Capacity 3.5 Gal (15 lit)
Gearbox Sealed for life. No gearlube to be added at any time.
Hydraulic Capacity 2.75 Gal (13 lit) – Viscosity 46