DM-10P | Detroit Band Saw

DM-10P

Starting At $13900

Exceptional cutting capability. Its cast iron head and vises are designed for rigidity – absorbing vibrations and ensuring accuracy during cutting. A rotating table with a single cut line allows head and blade groove to move together for smooth, accurate mitering.

From user-friendly operator controls, to easily accessible electrical panels and cabinets, the DM-10P double miter band saw is solidly built to provide maximum productivity.

Machine Voltages * 

Step One – Select Options

Step Two – Select Conveyors

Note: Adapter plate works as a bridge between the K110 out feed roller table. It is not to be used in conjunction with the 24″ work stop. If gauging is required on the K110 out feed roller table, you must purchase the R2 work stop.

Category:
Capacity Rectangular (h x w) Round Square
90° 9 1/2” x 11” 10” 9”
45° Left 6 1/4” x 4 1/2” 5 3/4” 4 1/2”
30° Right 5” x 4 1/2” 4” 5”
45° Right 8 1/4” x 7” 7 1/4” 7”
Blade Size 1” x 9’ 8” Coolant Tank Capacity 3.5 Gallons
Blade Drive 2/2.4 HP Machine Weight 1065 lbs.
Machine Voltage 208*, 240, 480, or 575* v Table Height 34”
Blade Speed Two speed – 118/236 SFM Dimensions (w x l x h) 39” x 67” x 73”
  • Electro-hydraulically operated easy swing, cast saw head
  • Quick release cast-iron vise with dovetail ways
  • Saw Head movement by means of control handle with safety spring loaded trigger switch to start or stop blade or feed mode (depending on selection)
  • A remote foot pedal starts the semi-automatic cycle
  • Rotating table with cut slot that moves in tandem with sawing head ,
  • Band tension indicator
  • Operator control box houses switches for selecting head feed option; (manual pull-down, powered feed or semi-automatic operation), and semi-automatic operation push buttons for head positioning.
  • Blade speed selection switch, coolant on/off/wash hose and E-Stop button are also found on the control box.
  • Small footprint
  • Robust steel base
  • Easy to read angle scale
  • Adjustable guide arm
  • Pre-set, replaceable carbide guide inserts
  • Mechanical blade tensioning
  • True-direct drive – no belts or pulleys
  • Safety door interlocks
  • Flood coolant
  • Adjustable work stop
  • Replaceable blade brush
  • Mist lubrication
  • R2 Work stop for K110 table
  • Adapter Plate for K110 table
  • 208/575 v transformer
  • K110 5’ infeed/out feed roller