1" Friction Blades - Detroit Band Saw

1″ Friction Blades

Starting At $15.07

Blade length should be ordered at the mid-point of manufacturer's recommendation to allow for take up.
Blades can be +/- ½ in depending on width and tooth size.


SKU: FSB1 Categories: ,


How does Friction bandsawing work?

1. Material is held to a fast moving welded to length saw blade typically running between 6,000-18,000 f.p.m.

2. The high frictional heat created allows the band saw blade to burn or melt away the material while the bandsaw blade teeth remove the molten metal from the work piece.

3. Since any given part of the band saw blade is out of contact with the metal being cut 99% of the time, the bandsaw blade itself remains cool to the touch. It is important to note that friction band sawing has solved many difficult metal cutting problems, but it has distinct limitations imposed by the size and thicknesses of the work pieces. Thicknesses over 3/4″ are extremely difficult to friction cut. Very thin or odd shaped metals may be successfully cut by friction sawing when conventional methods fail. Friction sawing creates very little drag, so the irrecular shapes can be held win the hands of the band saw operator and turned freely for trimming. The most typical materials cut using the friction sawing method are:

  • Stainless steel
  • Risers
  • Irregular Shapes
  • High Alloy Steel
  • Sheet Metal
  • Weldments
  • Armor Plate
  • Tubing
  • Cast Iron
  • Ferrous Metal

Blade thickness: 0.032″

Width: 1″
Length: choose from Menu above (full inch & fractional inch)


There are no reviews yet.

Be the first to review “1″ Friction Blades”

Your email address will not be published. Required fields are marked *