Founded in 1962, the M.K. Morse Company manufactures a comprehensive range of hand tools and power tool accessories. Products include: Carbon and Bimetal Bandsaw Blades, Hole Saws, Power and Hand Hacksaw Blades, Reciprocating (Sawzall) and Jigsaw Blades and Abrasives.

Carbon Bandsaw Blades can be welded to your required length in widths from 1/8" through 2". Coils are available in 100' and 250' lengths if you prefer to weld your own blades. Hard-to-find 5/8" wide bimetal blades are in stock, along with fine tooth (14T) 3/4" and 1" wide blades.

Reciprocating Blades can be purchased in pouches of 5 or bulk boxes of 50 in lengths from 4" to 12" Try our new McGripper in either a 9" or 12" length with its heavy duty .062 thickness. Ask about our current sale on 6" pouches!

Need a Hole Saw? Bimetal sizes are available from 9/16" through 6" diameters, with or without a built-in arbor. Ask about our Carbide Tipped, Carbide Grit, and Deep Hole styles for your special application.

Small to large Abrasive Cut-Off Wheels can be shipped in 1" through 20" diameters. Available for portable or stationary machines. Type 27 and 28 Depressed Center Wheels are available up to a 9" diameter.

Morse Metal Devil Saw Blades cut through steel as easily as traditional circular saw blades cut through soft pine 2 x 4's. They cut smoothly and cleanly through steel plate, angle iron, channel iron, aluminum plate, steel studs and other tough metal parts. A Metal Devil blade can cut through 6" x 1/4" thick steel plate in approximately 12 seconds!

When we demonstrate the Metal Devil Blade we ask viewers to touch the freshly cut metal edges. People are amazed to find the metal cool to the touch. The unique metallurgy of the carbide tips means there is minimal heat transferred to the inner plate. Most of the heat remains in the chips. Consequently, Metal Devil Blades save even more time by allowing you to handle parts immediately after cutting. Blades are available starting from 5-3/8" up to 14" diameter. Call today for more information!

Morse Metal Devil Blades will work on any professional quality circular saw. However, they reach their full potential when used on specially constructed metal-cutting circular saws. These metal-cutting saws utilize unique motors allowing them to maintain higher torque while cutting through tough metals. Metal-cutting saws are also safer to use since they prevent chips from flying and have special chip collection chambers. The Evolution Saws are designed for use with the Metal Devil Saw Blades.

Evolution 180:

• 7" diameter metal cutting circular saw
• Tool weight 13 lbs
• 3,500 RPM
• Retracting blade guard
• 11.0 amp motor

Evolution 230:

• 9" diameter metal cutting circular saw
• Tool weight 16 lbs
• 2,700 RPM
• Retracting blade guard
• 15.0 amp motor